Product Description
Details
Take total control of your engine cooling with the Davies Craig EWP®115 Alloy Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan. The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It’s a performance accessory that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
| Kit Contents | |||
|
EWP COMPONENTS |
HARDWARE BAG COMPONENTS |
||
|
Description |
Qty |
Description |
Qty |
|
EWP115 Alloy |
1 |
Scotch Lock |
1 |
|
EWP & FAN LCD Controller |
1 |
Ring Terminal |
1 |
|
Inline Adaptor |
1 |
Ring Terminal (Yellow) |
1 |
|
Wiring Harness (10A Fuse) |
1 |
Self Tap Screws |
1 |
|
Thin Rubber Sleeves |
4 |
Temp Sensor Assembly |
1 |
|
Hose Clamps |
4 |
Mount Pad Hook & Loop | 1 |
|
EWP Hardware Bag |
1 |
||
| Technical Specifications | ||||
| Technical Specifications - EWP115 | Technical Specification - LCD Controller | |||
| Operating voltage | 3V DC to 15V DC | Voltage range | 12V DC to 29V DC | |
| Maximum current | 10A @ 13V | Display LCD size | 70mm (2.76”) x 60mm (2.36”) | |
| Flow rate (max) | 115 L/min (30.38 US gal/min) @ 13V DC | Maximum current | 12Amps | |
| Operating temp. | -40° to 130°C (-40° to 266°F) | Warning alarm | High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit | |
| Pump design |
Clockwise centrifugal with volute chamber |
Targeted (set) temperatures | Singular degrees from: 40°C (104°F)to 110°C (230°F) |
|
| Pump weight | 920 grams (2.3 lb) | Memory | Set & targeted temperature | |
| Pump material | Aluminium (Powder Coated) | Fan cut-in temp. | 3°C (5.4°F) above the targeted (set) temperature | |
| Burst pressure | 500 kPa (72.5 psi) | Controller type | PCB with micro-processor | |
| Seal | Ceramic face seal | Sensor type | Thermister in housing | |
|
Fits hose sizes & Internal Thread |
35mm to 51mm (1.38” to 2”)
-Inlet & Outlet: -16AN (12) |
Overrun/ shutdown | -10°C (14°F) below set/target temperature or 3 minutes | |
| Indicators | Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) | |||
| Push-On fitting Size |
EWP Inlet & Outlet 38mm
|
Weight | 100 grams (3.5 oz) | |
| Dimensions |
Length = 95mm (3.7") Width = 130mm (5.1") Depth = 25mm (1”) |
|||
Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP® / Fan Digital Controller, the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. Davies, Craig’s revolutionary, Australian-designed EWP® pumps are made from anti-corrosive, lightweight Alloy reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring. The EWP®115 and LCD EWP® / Fan Digital Controller Combo Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine. The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely.
